--- title: "Dual-interface LAN configuration" slug: "dual-interface-lan-configuration-1" tags: ["Central Management System", "Install and Get Started"] updated: 2026-10-01T11:38:10Z published: 2026-10-01T11:38:15Z canonical: "docs.trellix.com/dual-interface-lan-configuration-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Dual-interface LAN configuration This configuration uses both the default HA interface and a backup HA interface. IP routing is not needed, because the two nodes are in the same subnet. ### Note For a topology diagram of this configuration, see [Example: dual-interface LAN deployment](/network-and-platform/docs/introduction-1) . - [Configuring the dual-interface LAN option using the wizard](/network-and-platform/docs/configuring-the-dual-interface-lan-option-using-the-wizard-1) - [Configuring the dual-interface LAN option using the CLI](/network-and-platform/docs/configuring-the-dual-interface-lan-option-using-the-cli-1) ### Prerequisites - Admin access - Requirements listed in [Basic requirements](/network-and-platform/docs/system-requirements-3#basic_requirements) - Physical Central Management System models: - Cable or switch requirements listed in [LAN deployment requirements](/network-and-platform/docs/system-requirements-3#lan_deployment_requirements) - Default and backup HA interface requirements listed in [LAN deployment requirements](/network-and-platform/docs/system-requirements-3#lan_deployment_requirements) - Virtual Central Management System models: - Virtual network configured as described in [Virtual network requirements](/network-and-platform/docs/virtual-central-management-system-network-requirements-1) :