--- title: "Edit a non-standard port entry" slug: "edit-a-non-standard-port-entry" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:40:51Z published: 2026-10-05T15:40:51Z canonical: "docs.trellix.com/edit-a-non-standard-port-entry" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Edit a non-standard port entry Editing a non-standard port entry means deleting a non-standard port number for a protocol. You cannot add a non-standard port number to an existing record. To add a non-standard port number to an existing record, you have to create a record for the same protocol and specify the required non-standard port number. When you save the record, the new number is automatically appended to the existing record for the protocol. Editing non-standard port entries is dependent upon the number of non-standard ports you entered for a given protocol. For example, assume that you have employed port 1021 for FTP traffic and added this entry. When you go back to edit the entry, your only option is to delete port 1021, which means deleting the entire non-standard port record for FTP. However, if you separately added entries for ports 1021 and 1121 for FTP traffic, editing this non-standard port entry enables you to delete one of the non-standard ports rather than both. ## Task 1. To edit non-standard ports for an admin domain: 1. Click the **Devices** tab. 2. From the **Domain** drop-down list, select the domain you want to work in. 3. In the left pane, click the **Global** tab. 4. Select **IPS Device Settings** → **Non-Standard Ports.** 2. To edit non-standard ports for a Sensor: 1. Click the **Devices** tab. 2. Select the domain from the **Domain** drop-down list. 3. On the left pane, click the **Devices** tab. 4. Select the device from the **Device** drop-down list. 5. Select **Setup** → **Advanced** → **Non-Standard Ports.** 3. Select a record and click ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-6E2D5582-3868-4FBA-BA20-20A3995E8669-low(1).png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A38%3A45Z&se=2026-11-20T12%3A38%3A45Z&sr=c&sp=r&sig=GAEInLVacNT49c%2BawUEBFwBQP98VnGhzfsvqBK952oI%3D) At the Sensor level, you can view the inherited list from the admin domain but cannot delete these. | Option | Definition | | --- | --- | | **Protocol** | Displays the application protocol and the transport protocol you specified when you created the record | | **Standard Port Number** | Automatically displays the standard port number for the selected protocol | | **Non-Standard Port Number** | Displays the non-standard port numbers that you added for the protocol | | **Delete** | Permanently deletes the selected **Non-Standard Port Number** | | **Cancel** | Closes the **View/Delete Non-standard Ports** page | 4. For the changes to take effect, perform a configuration update for the Sensor.