--- title: "email-analysis controlled-live‑mode enable" slug: "email-analysis-controlled-live-mode-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:24Z published: 2026-08-04T17:23:24Z canonical: "docs.trellix.com/email-analysis-controlled-live-mode-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # email-analysis controlled-live‑mode enable Enables controlled live mode. In controlled live mode, the Email Security — Server appliance monitors and manages communication between the Internet and the suspicious binary under analysis. MVX sends and receives this traffic on pether2. Operating in controlled live mode enables the appliance to detect malware that requires remote objects. Controlled live mode is disabled by default. You enable the feature separately from configuring the feature settings. > [!WARNING] > Important > > Validate end-to-end connectivity before you enable controlled live mode or URL dynamic analysis. To perform this validation using the CLI, use the `analysis live check‑connection` command in configuration mode. Controlled live mode requires pether2 network configuration settings: - pether2 IPv4 address and mask length - Default gateway IPv4 address - DNS name server IPv4 address If the local network uses a proxy server to access the Internet, additional configuration settings are required: - Proxy server IPv4 address and port number - Proxy server credentials (if authentication is required) ### Syntax `[no] email-analysis controlled-live-mode enable` ### Parameters `no` Disables multistage exploit detection. ### Examples The following example enables multistage exploit detection: ``` hostname (config) # email-analysis controlled-live-mode enable ``` The following example disables multistage exploit detection: ``` hostname (config) # no email-analysis controlled-live-mode enable ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Email Security — Server:** Release 7.8