--- title: "email-analysis mta softbounce" slug: "email-analysis-mta-softbounce" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:24Z published: 2026-08-04T17:23:24Z canonical: "docs.trellix.com/email-analysis-mta-softbounce" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # email-analysis mta softbounce Use this command to enable or disable soft bounce on the Email Security — Server appliance. Soft bounce is enabled by default to prevent emails from being dropped if they cannot be delivered to the next-hop IP address. These emails are placed in the Deferred Queue while the Email Security — Server appliance attempts to deliver them. If the emails still cannot be delivered when the timer for the Deferred Queue expires, they are transferred to the Bounced Queue, where they remain until the Bounced Queue timer expires. If soft bounce is disabled, emails that are not successfully delivered are permanently dropped and a non-delivery report is returned to the email sender. ### Syntax `[no] email-analysis mta softbounce` ### Parameters `[no]` Disables soft bounce on the appliance. ### Examples The following example enables soft bounce. ``` hostname (config) # email-analysis mta softbounce ``` The following example disables soft bounce. ``` hostname (config) # no email-analysis mta softbounce ``` ### User role Admin or Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Email Security — Server:** Release 8.3.0