--- title: "email-analysis policy xheader enable" slug: "email-analysis-policy-xheader-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:31Z published: 2026-08-04T17:23:31Z canonical: "docs.trellix.com/email-analysis-policy-xheader-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # email-analysis policy xheader enable Enables or disables the X-Header feature. When you enable the X-Header feature, the Email Security — Server appliance inserts the X-Header line that describes the MVX (Multi-Vector Virtual Execution) engine analysis and detection results. > [!NOTE] > Note > > The X-Header feature is disabled by default. > [!WARNING] > Important > > You cannot enable the X-Header feature when the Email Security — Server appliance is deployed in Drop analysis mode or Tap/Span analysis mode. For details about the X-Header, refer to the Email Security — Server User Guide. ### Syntax `[no] email-analysis policy xheader enable` ### Parameters `no` Disables the X-Header feature. ### Examples The following example enables the X-Header: ``` hostname (config) # email-analysis policy xheader enable ``` The following example disables the X-Header: ``` hostname (config) # no email-analysis policy xheader enable ``` ### User role Admin or Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Email Security — Server:** Before Release 7.5.0