--- title: "email-analysis reroute-message" slug: "email-analysis-reroute-message" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:31Z published: 2026-08-04T17:23:31Z canonical: "docs.trellix.com/email-analysis-reroute-message" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # email-analysis reroute-message Enable/disable re-writing email subject for malicious and riskware emails in monitor mode and for riskware emails in block mode. If your mail server encounters a temporary failure and is shut down for a period of time, you can redirect emails in the deferred queue by configuring an IP address and port of another downstream mail server on the Email Security — Server appliance. For details about how to redirect emails to another mail server, see the "Message Tracking" chapter of the Email Security — Server User Guide. > [!NOTE] > Note > > You can redirect emails to another downstream mail server when the Email Security — Server appliance is deployed in Block analysis mode or Monitor analysis mode. ### Syntax `[no] email-analysis policy re-write-subject enable` ### Parameters No Specifies the message queue identification number you want to redirect. `receiver-email <email_address>` Specifies the original email address of the recipient of the message that you want to redirect. `smtp-server <IP_address>` Specifies the SMTP server of the downstream IP address that is used to redirect the email. `smtp-port <port_number>` Specifies the SMTP port number of the downstream port that is used to redirect the email. ### Example The following example shows how to enable rewriting subject for malicious and riskware emails in monitor/block modes. ``` hostname (config) # email-analysis reroute-message queue-id 12437wbz37W1zMttcg receiver-email somebody@fireeye.com smtp-port 25 smtp-server 172.16.141.122 ``` ### User role Admin, Operator, or Monitor ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Email Security — Server:** Release 10.0.1 onwards.