--- title: "Enable and configure TAXII settings" slug: "enable-and-configure-taxii-settings" updated: 2026-09-08T19:56:44Z published: 2026-09-08T19:56:44Z canonical: "docs.trellix.com/enable-and-configure-taxii-settings" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enable and configure TAXII settings Ensure that you have configured an inbox service and set a data collection name on the TAXII server. 1. Log on to the Intelligent Sandbox interface, then click Manage → TIS Configuration → Global Settings and select **Generate STIX report**. 2. Click Manage → TIS Configuration → TAXII, then select **Enable TAXII Communication**. 3. In **URL**, type the address of your TAXII server. 4. Choose **None** or **Basic** based on the authentication requirement set for your server. If you choose **Basic**, type the user name and password for authentication. 5. If your TAXII server requires TAXII client authentication, select **Certificate Authentication Required**. 6. Use **Browse** to select a certificate, then click **Upload**. ### Note - The certificate must be in PEM format. - Merge the private key with your certificate. - Ensure that the certificate key-length is 2048 bytes or above. 7. Select **Enable Discovery** and do the following: 1. In **Discover Service URL**, type the URL for the discover service. This allows Intelligent Sandbox to check for available TAXII services on the TAXII server. 2. In **Collection URL**, type the URL for the data collection service. This allows Intelligent Sandbox to request information about available Data Collections on the TAXII server. 8. In **Inbox Path**, type the path of the managed inbox of your TAXII server. Inbox Path can be read from response obtained from Discover Services. 9. In **Collection Name**, type the name of the collection where the STIX reports are delivered. Collection Name can be read from response obtained from Discover Collection. 10. Click **Test Connection** to check the status of the connection between Intelligent Sandbox and the TAXII server. The check returns the status of the following: - Inbox service on collection name. - Discovery service (if enabled) - Collection Service (if enabled) 11. Click **Apply** to save your configuration. Once Intelligent Sandbox starts communicating with the TAXII server, the **TAXII Status** changes to the following: - **UP** – Last attempt to send STIX report to the TAXII server was successful. - **DOWN** – Last attempt to send STIX report to the TAXII server was unsuccessful. This status can also appear if the TAXII settings are not configured or incorrect. - **UNKNOWN** – Connection status is not yet verified by Intelligent Sandbox. :