--- title: "Enable communication between Syslog server and the Manager" slug: "enable-communication-between-syslog-server-and-the-manager-1" tags: ["Integration", "IPS 11.1.x"] updated: 2026-11-19T12:53:55Z published: 2026-11-19T12:53:55Z canonical: "docs.trellix.com/enable-communication-between-syslog-server-and-the-manager-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enable communication between Syslog server and the Manager To enable communication between the Syslog server and the Manager, perform the following tasks: - Create a user account in the Manager - Configure Syslog events in the Manager ### Create a user account in the Manager The Syslog server communicates with the Manager using a user account available in the Manager. You should create a user account in the Manager. To create a user in the Manager, login to the Manager MariaDB and create a user. This user can connect remotely to the Manager from the specified Syslog server. You should grant `SELECT` permissions to the user on the database. Run the following commands on the MariaDB command prompt: - `GRANT SELECT ON lf.* TO 'user_name'@'receiver_ip_address' IDENTIFIED BY 'user_name_password' WITH GRANT OPTION;` This command creates the user and sets the required privileges. In the command, `user_name` is the desired username, `user_name_password` is the password for the newly created user, and `receiver_ip_address` is the IP address of the Syslog server that will connect to the Manager. - FLUSH PRIVILEGES; This command applies the privilege changes without restarting MariaDB. ### Configure Syslog events in the Manager For information on configuring Syslog events in the Manager, see the Trellix Intrusion Prevention System Product Guide.