--- title: "Enable communication between Syslog server and the Manager" slug: "enable-communication-between-syslog-server-and-the-manager" tags: ["Integration", "IPS 10.1.10"] updated: 2026-09-21T08:19:56Z published: 2026-09-21T08:19:56Z canonical: "docs.trellix.com/enable-communication-between-syslog-server-and-the-manager" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enable communication between Syslog server and the Manager To enable communication between the Syslog server and the Manager, perform the following tasks: - Create a user account in the Manager - Configure Syslog events in the Manager ## Create a user account in the Manager The Syslog server communicates with the Manager using a user account available in the Manager. You should create a user account in the Manager. To create a user in the Manager, login to the Manager MariaDB and create a user. This user can connect remotely to the Manager from the specified Syslog server. You should grant SELECT permissions to the user on the database. Run the following commands on the MariaDB command prompt: - GRANT SELECT ON lf.* TO 'user_name'@'receiver_ip_address' IDENTIFIED BY 'user_name_password' WITH GRANT OPTION; This command creates the user and sets the required privileges. In the command, user_name is the desired username, user_name_password is the password for the newly created user, and receiver_ip_address is the IP address of the Syslog server that will connect to the Manager. - FLUSH PRIVILEGES; This command applies the privilege changes without restarting MariaDB. ## Configure Syslog events in the Manager For information on configuring Syslog events in the Manager, see the Trellix Intrusion Prevention System Product Guide.