--- title: "Enable DXL integration for a device" slug: "enable-dxl-integration-for-a-device-1" tags: ["Integration", "IPS 11.1.x"] updated: 2026-11-19T12:53:46Z published: 2026-11-19T12:53:46Z canonical: "docs.trellix.com/enable-dxl-integration-for-a-device-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enable DXL integration for a device **Prerequisite:** Make sure that you have enabled the integration with a ePO - On-prem server. DXL integration is disabled by default for a device. You can enable it to inherit settings from the domain or be independent for the device. 1. Go to **Devices** → **** → **Device** → **** → **Setup** → **DXL Integration**. The **Data Exchange Layer (DXL) Integration** page appears. 2. You have the option to use DXL integration preferences including ePO - On-prem server settings used in the domain. To use this option, select the **Inherit Settings?** checkbox. The remaining options are immediately disabled when you select this option. 3. If you have chosen to inherit settings from the domain, click **Save**. If not, proceed to step 4. 4. Select the **Enable DXL Integration?** checkbox. The Trellix ePO - On-prem server configuration fields are displayed. 5. Enter the ePO - On-prem server IPv4 address. **Trellix DXL integration for a device shows settings specific to it**![Trellix DXL integration for a device shows settings specific to it](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-1d9564d2-3166-93d0-5462-169ea9876515.png?sv=2026-02-06&spr=https&st=2026-11-20T12%3A56%3A49Z&se=2026-11-20T13%3A56%3A49Z&sr=c&sp=r&sig=bj0HNe2L8ZZpusYecLz5UmnKONkAAMitVdUFzWE72Zs%3D) 6. Enter the port that the Sensor must use to communicate with ePO - On-prem. 7. Enter the credentials the Sensor must use to access ePO - On-prem. > [!NOTE] > Note > > The credentials you configure here need not be the same credentials as those entered in the **ePO Integration** page. To review this configuration, click the **ePO Integration Settings** hyperlink at the top-right corner of this page. 8. Click **Save** to confirm your settings. DXL integration is now enabled with settings specific to this device.