--- title: "Enable jumbo frame parsing" slug: "enable-jumbo-frame-parsing-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:30:51Z published: 2026-11-19T12:30:51Z canonical: "docs.trellix.com/enable-jumbo-frame-parsing-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enable jumbo frame parsing For the Sensor to inspect jumbo frames for attacks and other supported IPS features, you must enable jumbo frame parsing at the Sensor level. > [!NOTE] > Note > > Jumbo frame traffic with SSL encryption will not be decrypted even if SSL decryption is enabled until version 11.1.5.122 1. Click the **Devices** tab. 2. Select the domain from the **Domain** drop-down list. 3. On the left pane, click the **Devices** tab. 4. Select the device from the **Device** drop-down list. 5. Select **Setup** → **Advanced** → **IP Settings**. **Common IP Parameters dialog**![Common IP Parameters dialog](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-314d7a6d-1d31-83e4-3bf2-ff575e0acec5(7).png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A46%3A37Z&se=2026-11-20T12%3A46%3A37Z&sr=c&sp=r&sig=Ij2imSguvub99pSGRCZhgwutH9Etucddf%2BMZKMOG4fE%3D) 6. In the **Common IP Parameters** section of the **IP Settings** page, select **Enabled** from the **Jumbo Frame Parsing** drop-down list and click **Update** to update the Sensor of the configuration change. 7. Reboot the Sensor for the changes to be effective. > [!NOTE] > Note > > For Sensors in a HA pair, jumbo parsing must be enabled on each member Sensor of the HA pair.