--- title: "Enable Layer 7 Data Collection for an interface or subinterface" slug: "enable-layer-7-data-collection-for-an-interface-or-subinterface" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:40:03Z published: 2026-10-05T15:40:03Z canonical: "docs.trellix.com/enable-layer-7-data-collection-for-an-interface-or-subinterface" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enable Layer 7 Data Collection for an interface or subinterface You can enable Layer 7 Data Collection per interface or sub-interface. To optimize Sensor performance, you can also specify the protocols and the fields that are to be exported. ## Task 1. Click the **Policy** tab. 2. From the **Domain** drop-down list, select the domain you want to inspect traffic. 3. Navigate to **Intrusion Prevention** → **Policy Manager**. 4. On the **Interface** tab, double-click the interface to enable the advanced traffic inspection. The **** panel opens. 5. In the **Inspection Options** section, select the policy from the **Policy** drop down list. To create a new policy, click the ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-A6ACF06E-8B7C-4F33-9335-99E4B1FDEB3D-low(2).png?sv=2026-02-06&spr=https&st=2026-11-20T13%3A40%3A42Z&se=2026-11-20T14%3A40%3A42Z&sr=c&sp=r&sig=Fx0pVeNdh3Cc7ZNty%2FfzSf7kn1BvEeCtgaA7qkAPADM%3D) icon or double-click on the policy to edit an already assigned policy. 6. The **Properties** page opens. Enter the **Name** and **Description**. Select the **Visibility** and click **Next**. The **Inspection Options** page opens. ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-489449B3-EFEA-425D-80A4-70DAE11AC57B-low(1).jpg?sv=2026-02-06&spr=https&st=2026-11-20T13%3A40%3A42Z&se=2026-11-20T14%3A40%3A42Z&sr=c&sp=r&sig=Fx0pVeNdh3Cc7ZNty%2FfzSf7kn1BvEeCtgaA7qkAPADM%3D) 7. On the **Traffic Inspection** tab, under **Miscellaneous**, enable **Layer 7 Data Collection** in the required direction. 8. Click **Save** in the **Inspection Options** page. 9. To save the configuration changes, click **Save** in the **** panel. You can manage layer 7 data collection options in the following path: 1. Click the **Devices** tab. 2. Select the domain from the **Domain** drop-down list. 3. In the left pane, click the **Devices** tab. 4. Select the device from the **Device** drop-down list. 5. Navigate to **Setup** → **Advanced** → **L7 Data Collection**. The **Layer 7 Data Collection** page displays. 6. Modify the required Layer 7 Data Collection options. > [!NOTE] > Important > > Enabling Layer 7 Data Collection is per interface or sub-interface. However, the Layer 7 Data Collection options are device wide. That is, these changes are applied to all the interfaces and sub-interfaces of the corresponding device. Also, you must reboot the device for the changes to take effect. You can do a hitless or a full reboot. > > For NS-series Sensors, you must do a full reboot as hitless reboot is not supported when SSL decryption is enabled. ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-65814915-8228-434B-AD5C-AAFFC8821F6C-low(1).png?sv=2026-02-06&spr=https&st=2026-11-20T13%3A40%3A42Z&se=2026-11-20T14%3A40%3A42Z&sr=c&sp=r&sig=Fx0pVeNdh3Cc7ZNty%2FfzSf7kn1BvEeCtgaA7qkAPADM%3D) | Option | Definition | | --- | --- | | **Percentage (%) of Flow Memory Re-Allocated to Collect Layer 7 Data** | The percentage of the maximum number of concurrent flows that capture Layer 7 data. The default value is 20%. > [!NOTE] > Note > > For NS7500 and NS9500 Sensors above 10.1.5.116, the default value is set to 100%. For example, an M-1450 Sensor supports around 80,000 concurrent flows. So if you enable Layer 7 Data Collection with the default value of 20%, up to around 16,000 flows can capture Layer 7 data. Currently, if there are 20,000 flows passing through the Sensor, then only the first 16,000 flows are examined for Layer 7 data capture. You can click **Edit** to modify the percentage of flows that capture Layer 7 data. However, this will change the number of concurrent flows supported by the Sensor. | | **Maximum Number of Concurrent TCP/UDP Flows Supported on this Device** | The maximum number of concurrent TCP/UDP flows supported by the Sensor. This capacity differs based on the Sensor model. Refer to Trellix Intrusion Prevention System Product Guide for the value for each model. | | **Protocols/Fields** | To optimize Sensor performance, you can choose to enable it for certain fields of the required protocols. | | **ftp** | Select **Enable**, **Disable**, or **Customize** to personalize your settings for the FTP protocol. Click ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-64007DBE-A893-4782-83D1-485E177DBBDE-low(1).png?sv=2026-02-06&spr=https&st=2026-11-20T13%3A40%3A42Z&se=2026-11-20T14%3A40%3A42Z&sr=c&sp=r&sig=Fx0pVeNdh3Cc7ZNty%2FfzSf7kn1BvEeCtgaA7qkAPADM%3D) to view the corresponding fields. The following options are available: - FTP Action - FTP Banner - FTP File Name - FTP Return Code - FTP User Name To disable a specific field, you must first select **Customize**. | | **http** | Select **Enable**, **Disable**, or **Customize** to personalize your settings for the HTTP protocol. Click ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-64007DBE-A893-4782-83D1-485E177DBBDE-low(1).png?sv=2026-02-06&spr=https&st=2026-11-20T13%3A40%3A42Z&se=2026-11-20T14%3A40%3A42Z&sr=c&sp=r&sig=Fx0pVeNdh3Cc7ZNty%2FfzSf7kn1BvEeCtgaA7qkAPADM%3D) to view the corresponding fields. The following options are available: - HTTP CLSID - HTTP Host - HTTP Request Content Type - HTTP Request Filename - HTTP Request Method - HTTP Request Referrer - HTTP Request URL - HTTP Response Content Type - HTTP Return Code - HTTP Server Type - HTTP URI - HTTP User-Agent To disable a specific field, you must first select **Customize**. | | **netbios-ss** | Select **Enable**, **Disable**, or **Customize** to personalize your settings for the NetBIOS protocol. Click ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-64007DBE-A893-4782-83D1-485E177DBBDE-low(1).png?sv=2026-02-06&spr=https&st=2026-11-20T13%3A40%3A42Z&se=2026-11-20T14%3A40%3A42Z&sr=c&sp=r&sig=Fx0pVeNdh3Cc7ZNty%2FfzSf7kn1BvEeCtgaA7qkAPADM%3D) to view the corresponding fields. The following options are available: - NetBIOS Action - NetBIOS File Name To disable a specific field, you must first select **Customize**. | | **smtp** | Select **Enable**, **Disable**, or **Customize** to personalize your settings for the SMTP protocol. Click ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-64007DBE-A893-4782-83D1-485E177DBBDE-low(1).png?sv=2026-02-06&spr=https&st=2026-11-20T13%3A40%3A42Z&se=2026-11-20T14%3A40%3A42Z&sr=c&sp=r&sig=Fx0pVeNdh3Cc7ZNty%2FfzSf7kn1BvEeCtgaA7qkAPADM%3D) to view the corresponding fields. The following options are available: - SMTP Attachments - SMTP Banner - SMTP Recipients - SMTP Sender To disable a specific field, you must first select **Customize**. | | **telnet** | Select **Enable**, **Disable**, or **Customize** to personalize your settings for the TELNET protocol. Click ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-64007DBE-A893-4782-83D1-485E177DBBDE-low(1).png?sv=2026-02-06&spr=https&st=2026-11-20T13%3A40%3A42Z&se=2026-11-20T14%3A40%3A42Z&sr=c&sp=r&sig=Fx0pVeNdh3Cc7ZNty%2FfzSf7kn1BvEeCtgaA7qkAPADM%3D) to view the corresponding fields. The following option is available: - TELNET User Name To disable, you must first select **Customize**. | | **Save** | Applies the changes across the Sensor. You must do a hitless or full reboot for the changes to take effect. > [!NOTE] > Note > > For NS-series Sensors, you must do a full reboot as hitless reboot is not supported when SSL decryption is enabled. |