--- title: "Enable mobile malware detection" slug: "enable-mobile-malware-detection-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:30:59Z published: 2026-11-19T12:30:59Z canonical: "docs.trellix.com/enable-mobile-malware-detection-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enable mobile malware detection Following are the steps to enable mobile malware detection: 1. The GTP feature is disabled on the Sensor by default. You can enable the GTP feature on the Sensor by using the these steps: - Go to **Devices** → **** → **Devices** → **** → **Setup** → **Advanced** → **Advanced Device Settings** and select **Inspect Tunneled Traffic** and click **Save**. This enables parsing of traffic for all supported tunneling protocols including GTP for malware detection. By default, this checkbox is deselected. > [!NOTE] > Note > > At an admin domain level, configure this for multiple Sensors by navigating to **Devices** → **** → **Global** → **IPS Device Settings** → **Advanced Device Settings** and select **Inspect Tunneled Traffic** and click **Save**. - Check the status of tunneled traffic with this CLI command: **Syntax**: `show parsetunneledtraffic status` Displays the status of the current tunneling configuration of the Sensor. 2. Enable GTI File Reputation under **Policy** → **** → **Intrusion Prevention** → **Policy Types** → **Advanced Malware** and click ![GUID-E7BA235E-C8E9-494B-A481-32F301FEAAB8-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-a265d0b5-4039-16f5-7bb1-cb4512697e13(8).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A52%3A24Z&se=2026-11-20T11%3A52%3A24Z&sr=c&sp=r&sig=nDwYRLlbWLakWQNLO%2FDmtPxj1%2Fn%2BSVrGulv5yCyWl3E%3D). - To create a new policy and enable the GTI File Reputation for the required file type, navigate to **Policy** → **** → **Intrusion Prevention** → **Policy Manager**. 3. Configure the DNS Server under **Devices** → **** → **Global** → **Common Device Settings** → **Name Resolution**. For more information, see section [Configure the DNS server details](/network-and-platform/docs/configure-the-dns-server-details-4), chapter Configure Firewall Policies. 4. Set the policy to Default Prevention under **Policy** → **** → **Intrusion Prevention** → **Policy Types** → **IPS**. > [!NOTE] > Note > > The Default Prevention policy is set by default. In case it is not set, then navigate to the above mentioned path to set it. 5. You can set and view the following policy details configured in the Manager: - Reconnaissance attack details - Callback Detector details - Network Forensics details - Packet Capture details - Customizing scan attack details Trellix IPS generates alerts and events, which help keep track of the malware, bots, worms detected. You can view the attacker and target IP addresses from where the attack was generated when GTP feature is enabled. The alerts can be viewed in Attack Log which also displays the details of the attack. **The inner attacker and target IP address as displayed in the alert**![The inner attacker and target IP address as displayed in the alert](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-2aad07ba-a6ad-0127-a590-583756a44a58(7).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A52%3A24Z&se=2026-11-20T11%3A52%3A24Z&sr=c&sp=r&sig=nDwYRLlbWLakWQNLO%2FDmtPxj1%2Fn%2BSVrGulv5yCyWl3E%3D)