This section explains about enabling and disabling a monitoring port from the Monitoring Ports tab.
To view or configure the settings of the monitoring ports for Trellix IPS, you access the configuration page in Devices → <Admin Domain Name> → Devices → <Device_Name> → Setup → Physical Ports. A list of ports available for the device you selected are displayed on the Monitoring Ports tab of a new page.
To disable a monitoring port:
Click on the row of the monitoring port that you wish to disable.
Note
To disable multiple monitoring ports, press the Ctrl key and click on multiple monitoring ports that you wish to disable.
Since monitoring ports are internally wired, when you disable one of the ports in a pair, the corresponding port is also disabled.
Click on the Disable button. The monitoring port(s) are disabled.
To enable a monitoring port:
Click on the row of the monitoring port that you wish to enable.
Note
To enable multiple monitoring ports, press the Ctrl key and click on multiple monitoring ports that you wish to enable.
Click on the Enable button. The monitoring port(s) are enabled.
Note
The configurations made to the monitoring port will not be pushed to the Sensor automatically when the port is in Disable state. Trellix recommends you to perform Deploy Pending Changes immediately after changing the port status.