--- title: "Enable Quarantine for an inline monitoring port" slug: "enable-quarantine-for-an-inline-monitoring-port-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:28:11Z published: 2026-11-19T12:28:11Z canonical: "docs.trellix.com/enable-quarantine-for-an-inline-monitoring-port-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enable Quarantine for an inline monitoring port Make sure the Sensor is up and you have deployed the required monitoring ports in inline mode. Use the **Quarantine Configuration Wizard** to enable and configure **Quarantine** for specific Sensor monitoring ports. 1. Click the **Devices** tab. 2. Select the domain from the **Domain** drop-down list. 3. On the left pane, click the **Devices** tab. 4. Select the device from the **Device** drop-down list. 5. Select **Setup** → **Quarantine** → **Port Settings**. 6. From the **Port** drop-down list, select the Sensor monitoring port for which you want to configure **Quarantine**. The current **Quarantine** configuration for the port are displayed. 7. Click **Run Configuration Wizard**. This button is available only if the Sensor is up. 8. Configure **Quarantine** for the selected Sensor monitoring port using the **Quarantine Configuration Wizard**. > [!NOTE] > Note > > Throughout this wizard, click **Next** to proceed to the next page. Click **Cancel** to exit the wizard without saving the changes. **Quarantine Configuration Wizard for monitoring ports**![Quarantine Configuration Wizard for monitoring ports](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-a53f279a-18d1-f5c8-9e90-88c67995b646(7).png?sv=2026-02-06&spr=https&st=2026-11-20T13%3A19%3A11Z&se=2026-11-20T14%3A19%3A11Z&sr=c&sp=r&sig=Oe2KGXZ28mpddfg3OIt71DaIEq%2Fl8OjbbI4k%2BNWJyjw%3D) | Option | Definition | | --- | --- | | **Use Global Settings** | When selected, the **Quarantine** configuration from the admin domain is applied to this Sensor port. You can proceed to the next page in the wizard. However, you must have enabled **Quarantine** at the domain level. To modify the **Quarantine** settings for the Sensor port, deselect **Use Global Settings**. | | **Would you like to quarantine endpoints that attempt intrusions?** | When selected, enables the **Quarantine** feature for the selected port. | | **Would you like to intercept HTTP requests from quarantined endpoints and respond with a browser message explaining why they have been quarantined?** | For the selected port, enables redirection to the **Quarantine** browser message and subsequently to the **Remediation Portal**. | | **Quarantine Zone** | Lists the Quarantine Zones that are available for the port. | | **Release Logic** | - **Automatic Release After a Specific Amount of Time** — The Sensor automatically releases the host from quarantine after the time period you specify in the **Release After** field. - **Keep in Quarantine Until Explicit Released** — The Sensor quarantines the host until you manually release it. | | **Release After** | Enter the quarantine time period (between 5 and 60 minutes), if you had selected **Automatic Release After a Specific Amount of Time** in the **Release Logic** field. | | **Quarantine Exceptions** | Displays the details of the hosts and networks for which you do not want to quarantine. - **Use Global Settings** — When selected, the quarantine exceptions list from the admin domain is applied to the Sensor port. However, you must have enabled **Quarantine** with a quarantine exceptions list at the domain level. To customize the list for the Sensor port, deselect **Use Global Settings**.You can inherit the list of quarantine exceptions from the admin domain. - **List Inheritance: Append** — When selected, the quarantine exceptions list from the admin domain is displayed and you can add more entries to it. - **List Inheritance: Override** — Select to configure a separate quarantine exceptions list for the port. - **New** — Adds a new record to the quarantine exceptions list. - **Type** — Select based on how you plan to create the quarantine exceptions record. You can choose to enter the IPv4/IPv6 address of the host to be excluded, IPv4 network to be excluded, or select a IPv4 Endpoint, IPv6 Endpoint or IPv4 Network rule object. - **Value** — Based on your selection in the **Type** field, enter the IP address, network, or choose the rule object. - **Description** — Optionally, enter any notes regarding the quarantine exceptions record. - **Edit** — Select a record in the quarantine exceptions table and click this button to make changes to the **Value** and **Description** fields of that record. - **Delete** — Select a record in the quarantine exceptions table and click this button to delete it from the Manager database. - **Import** — If you have too many entries, then you can import them from a .csv file. | | **Finish** | Saves the **Quarantine** configuration to the Manager database and exits the wizard. > [!NOTE] > Note > > You must do a configuration update to the Sensors for these changes to take effect. | ![GUID-7B116BCA-7FBD-4BF9-99B4-C8033C9D1CCB-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-208788c0-7221-4509-98cc-063fe70fd665(7).png?sv=2026-02-06&spr=https&st=2026-11-20T13%3A19%3A11Z&se=2026-11-20T14%3A19%3A11Z&sr=c&sp=r&sig=Oe2KGXZ28mpddfg3OIt71DaIEq%2Fl8OjbbI4k%2BNWJyjw%3D)