--- title: "Enable RMM" slug: "enable-rmm" updated: 2026-09-08T19:56:54Z published: 2026-09-08T19:56:54Z canonical: "docs.trellix.com/enable-rmm" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enable RMM Enable Intel RMM on your Intelligent Sandbox Appliance. 1. Restart the Intelligent Sandbox Appliance. 2. During the reboot process, press **F2**. 3. On the **BIOS Setup Utility** page, select the **Server Management** tab. 4. Select **BMC LAN Configuration**. 5. Locate **Intel (R) RMM4 LAN configuration** and configure the settings. 1. Highlight **IP Source**, press **Enter**, then select **Static**. 2. Highlight **IP Address**, then enter the IP address. 3. Highlight **Subnet Mask**, then enter the subnet mask address. 4. Highlight **Gateway IP**, then enter the gateway IP address. 6. Locate **User configuration** and configure the settings. 1. Highlight **User status**, press **Enter**, then select **Enabled**. 2. Highlight **User password**, press **Enter**, then enter the root account password. 3. Press **Enter**, confirm the password, then press **Enter** again. 7. Press **F10**, then press **Enter**. 8. Log on to the RMM interface. :