---
title: "Enable rule match notification"
slug: "enable-rule-match-notification"
tags: ["Product Usage", "IPS 10.1.10"]
updated: 2026-09-06T12:30:51Z
published: 2026-10-05T15:41:20Z
canonical: "docs.trellix.com/enable-rule-match-notification"
---
> ## Documentation Index
> Fetch the complete documentation index at: https://docs.trellix.com/llms.txt
> Use this file to discover all available pages before exploring further.
# Enable rule match notification
## Task
1. Click the
**Manager** tab.
2. From the
**Domain** drop-down list, select the domain you want to work in.
3. Select
**Setup** → **Notification** → **Firewall Access Events**.
4. Specify the domain-level syslog details in the corresponding fields.
Syslog server details for Quarantine
.png?sv=2026-02-06&spr=https&st=2026-11-22T17%3A38%3A59Z&se=2026-11-22T18%3A38%3A59Z&sr=c&sp=r&sig=qyZbePZL9Cgf8hX71epYoTJa84%2FOCm026f4cIA20vzQ%3D)
| Option | Definition |
| --- | --- |
| **Enable Syslog Notification** | If you select **Yes,** the details of the traffic that matched an access rule is forwarded to a syslog server. You can also configure the details now and enable it at a later time. |
| **Admin Domains** | - **Current** — The syslog configuration applies only to the current domain. This is always enabled for the current domain. - **Children** — The syslog configuration applies to child domains as well. You can also modify this syslog configuration at a child domain if required. |
| **Server Name or IP Address** | Enter the syslog server name or its IP (IPv4 or IPv6) address. If you specify the syslog server name: - The Manager uses the DNS servers configured in its TCP/IP properties. - If you choose the Sensor to forward the logs to a syslog, then the Sensor uses the DNS servers that you configured in the **Name Resolution** page for the Sensor. > [!NOTE] > Note > > The length of server name has been increased to support up to 255 characters from 40 characters. |
| **Port** | Enter the communication port number on the target server which is authorized to receive syslog messages. The standard port for syslog, which is 514, is pre-filled in the field. If you are using a non-standard port, then replace 514 with that number. |
| **Facility** | Lists the syslog prioritization values. By default, the syslog messages forwarded to a syslog server are of **Security authorization** prioritization value. |
| **Severity** | Lists the syslog priority values. By default, the syslog messages forwarded to a syslog server are of **Debug** severity. |
| **Message Body** | Optionally, customize the default syslog message. There are two types: - **System Default** — The default message is a quick summary for easy recognition. A default message reads: "$IV_SENSOR_NAME$$IV_ACL_ID$$IV_ACL_ACTION$$IV_APPLICATION_PROTOCOL$$IV_SOURCE_IP$$IV_SOURCE_PORT$ $IV_DESTINATION_IP$$IV_DESTINATION_PORT$" - **Customized** — You can customize the message after you successfully save the syslog configuration details. Click **Test Connection** to view the option to edit the default message. |
| **Test Connection** | Checks if the Manager is able to send logs to the syslog server. Check your syslog server if it has received the test message from the Manager. If not, check the syslog server name or IP address that you had provided. Ping the syslog server from the Manager server to see if the Manager is able to reach the syslog server. If you plan to configure M-series or NS-series Sensors to directly send the messages to the syslog server, ping the syslog server from the Sensor's CLI. This option is available in the **Firewall Logging** page. > [!NOTE] > Note > > You can use the test connection feature, even if you have set **Enable Syslog Forwarding?** to no. |
| **Save** | Saves the syslog configuration changes in the Manager database. Once you click **Save**, you will be able to customize the message format sent to the syslog server. > [!NOTE] > Note > > If you have modified the syslog configuration, then do a configuration update of the Sensors for the changed settings to take effect. |
5. Click
**Save**.
> [!NOTE]
> Note
>
> Once you click **Save**, you will be able to customize the message format sent to the syslog server.
6. Do a Configuration Update for the Sensors for the notification settings to take effect.
> [!NOTE]
> Note
>
> Use the show acl stats command in the Sensor's CLI to see the count of ACL logs sent through the Manager. For M-series Sensors, you can also see the count of Firewall logs sent directly.