--- title: "Enable syslog forwarding for alert notifications at the Sensor level" slug: "enable-syslog-forwarding-for-alert-notifications-at-the-sensor-level-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:31Z published: 2026-11-19T12:29:31Z canonical: "docs.trellix.com/enable-syslog-forwarding-for-alert-notifications-at-the-sensor-level-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enable syslog forwarding for alert notifications at the Sensor level Make sure you have configured a syslog server with an IP address that will be reachable to the respective Sensors. By configuring settings in this page, you will be able to enable syslog forwarding for the Sensor. Unless you inherit settings from the domain, any configuration in this page will override settings defined at the domain level. 1. Select **Devices** → **** → **Devices** → **** → **Setup** → **Logging** → **IPS Event Logging**. 2. If you want to use settings configured for the domain, select the **Inherit Settings** checkbox. 3. Click **Save** to complete the configuration. However, if you want to configure settings at the domain level, see [Enable syslog forwarding for alert notifications at the domain level](/network-and-platform/docs/enable-syslog-forwarding-for-alert-notifications-at-the-domain-level-3). After you complete configuring these settings, syslog forwarding for the Sensor is enabled.