--- title: "Enable Telemetry in the Manager" slug: "enable-telemetry-in-the-manager-1" tags: ["Integration", "IPS 11.1.x"] updated: 2026-11-19T12:54:06Z published: 2026-11-19T12:54:06Z canonical: "docs.trellix.com/enable-telemetry-in-the-manager-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enable Telemetry in the Manager To enable Telemetry in the Manager, perform the following steps: 1. In the Manager, navigate to **Manager** → **** → **Setup** → **Telemetry**. The **Telemetry** page is displayed. **Telemetry page**![Participation page](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-639074e0-7544-002f-8025-e0d35d2b7c3a(1).png?sv=2026-02-06&spr=https&st=2026-11-20T17%3A13%3A11Z&se=2026-11-20T18%3A13%3A11Z&sr=c&sp=r&sig=qhyrSKkkalAxAz49%2BybbE3NLVMEdzKscvDEc4%2FRwcjM%3D) 2. Select and configure the **Alert Data Details**, **Alert Data Summary**, **General Setup**, and **Feature Usage** details to be sent to Trellix telemetry servers. > [!NOTE] > Note > > The **Alert Data Details**, **General Setup**, and **Feature Usage** details are mandatory data that should be sent to the Trellix Insights when integration is enabled. > [!NOTE] > Note > > For more details on Telemetry and configuration options available in the **Telemetry**page, refer to the section Telemetry in Trellix Intrusion Prevention System Product Guide. 3. In **Alert Data Details Filter** field, select the alert severity level(s) for which you want to send the alert details. Available severity levels are **High**, **Medium**, **Low**, and **Informational**. 4. In **Technical Contact Information** field, update the required fields to provide your contact information. The Manager collects the contact information only when you provide consent to send them via **Send Contact Information?** option. 5. [Optional] To check whether communication to the GTI server is established, click **Test Connection**. 6. Click **Save**.