--- title: "Enable the association of a Client Group at the domain level" slug: "enable-the-association-of-a-client-group-at-the-domain-level" tags: ["Integration", "IPS 11.1.x"] updated: 2026-11-19T12:54:06Z published: 2026-11-19T12:54:06Z canonical: "docs.trellix.com/enable-the-association-of-a-client-group-at-the-domain-level" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enable the association of a Client Group at the domain level **Prerequisites:** You can enable the association of any Client group at the admin domain level or any child domain using the **Devices** → **** → **Global** → **IPS Device Settings** → **NI Integration** → **Client Group Association** tab. The task of Client Group association completes the Trellix IPS - Trellix NI integration process. Before you enable the association of Client Group for any domain in the Manager: - Make sure that you have configured the required Client Profile and Client Group on the NI appliance. For more information how to configure a Client Profile and Client Group using the NI CLI, refer to the topics [Create a Client Profile on the NI CLI](/network-and-platform/docs/create-a-client-profile-on-the-ni-cli) and [Create a Client Group on the NI CLI](/network-and-platform/docs/create-a-client-group-on-the-ni-cli). - Make sure that you have added the Client Group configured on the NI appliance to the Manager using the **Devices** → **** → **Global** → **IPS Device Settings** → **NI Integration** → **Client Group Configuration** tab. If you have not done it, you may add it by accessing the **Client Group Association** tab available at the domain level. Refer to the steps outlined below for more information. - Ensure that you have added an Inspection Options policy with Layer 7 Data Collection enabled at the required domain and have assigned it to the required interfaces and sub-interfaces. Refer to the chapter Working with Inspection options policies in Trellix Intrusion Prevention System 11.1 Product Guide for detailed information. **Steps:** Perform the following steps to enable association of a Client Group at the domain level: 1. In the Manager, go to the **Devices** page and select the required domain from the **Domain** drop-down list. 2. Now, select **Global** → **IPS Device Settings** → **NI Integration**. The **NI integration** page is displayed in the Manager. 3. To enable association of a Client group at the domain level, select the **Client Group Association** tab. The configuration options within the **Client Group Association** tab are displayed. **Configuration options in Client Group Association tab at the domain level**![Configuration options in Client Group Association tab at the domain level](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-3758d63d-09b0-757f-4dfe-e3c92ee28cdb.png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A52%3A52Z&se=2026-11-20T11%3A52%3A52Z&sr=c&sp=r&sig=2zJ6BmoSIBEqVP8C%2BbCBRap7YugloIRC8YvSMJGxHzw%3D) 4. Specify the following configuration options in the appropriate fields: | Field | Description | | --- | --- | | **Inherit Settings?** | Selecting this checkbox means the entire domain and all Sensors attached to that domain will inherit global settings and no further options will appear in this page. | | The following options appear only when **Inherit Settings?** is deselected | | | **Enable Association with NI Appliance** | Select this checkbox to start the process of enabling Client Group association for the selected domain. | | The following options appear only when **Enable Association with NI Appliance** checkbox is selected | | **Client Group** | This field enables you to select the specific Client Group to be enabled for a specific domain on the Manager via the following two options: - You can select the required Client Group from the drop-down list, if the Client Group has been added in the Manager using the **Devices** → **** → **Global** → **IPS Device Settings** → **NI Integration** → **Client Group Configuration** tab. - If you have not yet added the required Client Group in the Manager, click ![GUID-E7BA235E-C8E9-494B-A481-32F301FEAAB8-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-72053356-4c05-0f24-325f-27e024879a39(2).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A52%3A52Z&se=2026-11-20T11%3A52%3A52Z&sr=c&sp=r&sig=2zJ6BmoSIBEqVP8C%2BbCBRap7YugloIRC8YvSMJGxHzw%3D) icon. **Create New Client Group** panel is displayed in which you can provide the Client Group name, the IPv4 address of the associated NI appliance, and authentication hash token attached to the specific Client Group, and click **Save**. ![GUID-AA7349A1-36F0-47D8-B8C3-DD2FE0DED078-low.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-f83aadfd-4001-35df-a543-760a86450df1.jpg?sv=2026-02-06&spr=https&st=2026-11-20T10%3A52%3A52Z&se=2026-11-20T11%3A52%3A52Z&sr=c&sp=r&sig=2zJ6BmoSIBEqVP8C%2BbCBRap7YugloIRC8YvSMJGxHzw%3D) Once the Client group addition is successful, it gets automatically selected in the **Client Group** drop-down list. | | **NI Appliance IP Address** | The IPv4 or IPv6 address of the NI appliance is automatically fetched in the field once you specify the Client Group from the drop-down or add it using the ![GUID-E7BA235E-C8E9-494B-A481-32F301FEAAB8-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-72053356-4c05-0f24-325f-27e024879a39(2).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A52%3A52Z&se=2026-11-20T11%3A52%3A52Z&sr=c&sp=r&sig=2zJ6BmoSIBEqVP8C%2BbCBRap7YugloIRC8YvSMJGxHzw%3D) icon above. | Once all fields have been configured, Click **Save**. After updating the NI integration configuration on the **Client Group Association** at the domain-level, you must deploy configuration changes to the required Sensor(s) for the updates to take effect. This marks the successful completion of the task of enabling NI integration at a domain-level in the Manager. In case you want to modify the Client Group association settings in the concerned domain at a later time, you may do so by performing either of the following two steps: - Selecting it in the required Client Group from the **Client Group** drop-down list and then saving the changes, provided that it has been already added in the Manager using the **Client Group Configuration** tab. - Adding the required Client Group using the ![GUID-E7BA235E-C8E9-494B-A481-32F301FEAAB8-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-72053356-4c05-0f24-325f-27e024879a39(2).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A52%3A52Z&se=2026-11-20T11%3A52%3A52Z&sr=c&sp=r&sig=2zJ6BmoSIBEqVP8C%2BbCBRap7YugloIRC8YvSMJGxHzw%3D) icon present on the **Client Group Association** tab at the Global-level and then saving the changes If you wish to enable the association of separate Client Group(s) with different configurations for specific Sensor(s), you can do so from the **Devices** → **** → **Devices** → **** → **Setup** → **NI Integration** → **Client Group Association** tab.