--- title: "Enable the CAC authentication" slug: "enable-the-cac-authentication-4" tags: ["Install and Get Started", "IPS 11.1.x"] updated: 2026-11-19T12:54:06Z published: 2026-11-19T12:54:06Z canonical: "docs.trellix.com/enable-the-cac-authentication-4" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enable the CAC authentication The CAC authentication feature is disabled by default. It is mandatory to set up the CAC user accounts and import the CAC certificates to the Manager, before enabling it. To enable CAC, do the following: **Steps:** 1. Log in to the Manager GUI. 2. Go to, **Manager** → **** → **Setup** → **GUI Access** → **CAC Authentication**. The **CAC Authentication** page opens. ![GUID-EBFFBCD8-7827-4A0B-92D7-0FA7CAB17618-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-204e2081-16fd-743a-625b-ad00f861a218(1).png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A45%3A46Z&se=2026-11-20T07%3A45%3A46Z&sr=c&sp=r&sig=QZozV8SehcX0q14E0De18TCeNvC8DBePCIua0PjVfmE%3D) 3. In the **Settings** tab, configure the CAC Authentication as needed. ![GUID-53492448-05AC-4BCE-A191-B5BA21DA0641-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-8740c6d1-5437-9d88-ab05-533c2f5bdfa9(1).png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A45%3A46Z&se=2026-11-20T07%3A45%3A46Z&sr=c&sp=r&sig=QZozV8SehcX0q14E0De18TCeNvC8DBePCIua0PjVfmE%3D) The table below describes the fields available for configuration: | Field | Description | | --- | --- | | **CAC Support Enabled** | Select the checkbox to enable CAC Authentication. By default, the CAC Authentication is disabled. | | **Raise Fault for Expiring Certificates** | Select the checkbox to configure the Manager to generate faults when a trusted certificate is about to expire. | | **Expiration Threshold (days)** | Number of days for the trusted certificate expiration when a fault is generated in the Manager. > [!NOTE] > Note > > The **Expiration Threshold (days)** can be within the range of 30 to 60 days only. > [!NOTE] > Note > > The **Expiration Threshold (days)** can be configured only when the **Raise Fault for Expiring Certificate** option is enabled. | | **Enable OCSP Support** | Select the checkbox to enable OCSP Support. By default, the OCSP Support is disabled. | | **OCSP Options** | | | **OCSP URL** | Select **Default** to use the OCSP URL defined in the trusted certificate or **Custom** to configure a unified OCSP URL for all trusted certificates in the Manager. | | **Custom URL** | Specify the OCSP URL for authenticating the trusted certificates. > [!NOTE] > Note > > The **Custom URL** field is available only when you have the **OCSP URL** option set to **Custom**. | | **Require OCSP Re-Check** | Select **Yes** to verify the authenticity of the trusted certificate after a definite interval. | | **Re-Check Interval (minutes)** | Specify the duratin in minutes after which the authenticity of the trusted certificate is rechecked. > [!NOTE] > Note > > The **Re-Check Interval (minutes)** can be within the range of 30 to 1440 minutes only. > [!NOTE] > Note > > The **Re-Check Interval (minutes)** can be configured only when the **Require OCSP Re-Check** option is enabled. | 4. Click **Save**. 5. Log in to the Manager shell. 6. Stop the Manager service using the `manager stop` command. 7. Restart the Manager service using the `manager start` command.