--- title: "Enabling access groups for alerts using the CLI" slug: "enabling-access-groups-for-alerts-using-the-cli-1" tags: ["File Protect (FX)", "Malware Analysis (AX)", "IAM", "Email Security - Cloud", "Network Security (NX)", "Email Security — Server", "Central Management System", "Helix Enterprise", "Endpoint Security (HX)", "Product Usage", "Install and Get Started", "Helix", "Intelligent Virtual Execution "] updated: 2026-09-01T19:03:12Z published: 2026-09-01T19:03:12Z canonical: "docs.trellix.com/enabling-access-groups-for-alerts-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling access groups for alerts using the CLI Use the commands in this topic to enable the use of access groups for alerts. To enable access groups for alerts: 1. Log in to the Central Management System appliance. 2. Go to CLI configuration mode: ``` cm-hostname > enable cm-hostname # configure terminal ``` 3. Enable the access group for alerts feature: ``` cm-hostname (config) # aaa authorization access-groups area alerts enable [force] ``` where` force `suppresses the prompt to confirm your action. 4. If prompted to confirm your action, enter` YES`. 5. Verify your change: ``` cm-hostname (config) # show aaa authorization access-groups ``` 6. Save your change: ``` cm-hostname (config) # write memory ``` ### Example The following example enables access groups for alerts on the cm-05 appliance. ``` cm-05 (config) # aaa authorization access-groups area alerts enable Type 'YES' to confirm enabling access groups that limit access to certain objects like alerts for non-admin users: YES ``` ``` cm-05 (config) # show aaa authorization access-groups AAA Access-groups enabled for : alerts ---------------------------------------------- # Group: nx-alerts     ---------------------------------------------- # Rule           Statements ---------------------------------------------- #1               Not Match Alert Severity: minor ... ``` ### Note For an example of a fully configured access group, see [Example: configuring an access groups for alerts](/docs/example-configuring-an-access-group-for-alerts). :