--- title: "Enabling access groups for YARA rules using the CLI" slug: "enabling-access-groups-for-yara-rules-using-the-cli-1" tags: ["File Protect (FX)", "Malware Analysis (AX)", "IAM", "Email Security - Cloud", "Network Security (NX)", "Email Security — Server", "Central Management System", "Helix Enterprise", "Endpoint Security (HX)", "Product Usage", "Install and Get Started", "Helix", "Intelligent Virtual Execution "] updated: 2026-09-01T19:03:12Z published: 2026-09-01T19:03:12Z canonical: "docs.trellix.com/enabling-access-groups-for-yara-rules-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling access groups for YARA rules using the CLI Use the commands in this topic to enable the use of access groups for YARA rules access. To enable access groups for YARA rules: 1. Log in to the Network Security appliance. 2. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 3. Enable the access group for YARA rules feature: ``` hostname (config) # aaa authorization access-groups area yara_rules enable ``` 4. If prompted to confirm your action, enter` YES`. 5. Verify your change: ``` hostname (config) # show aaa authorization access-groups ``` 6. Save your change: ``` hostname (config) # write memory ``` ### Example The following example enables access groups for YARA rules access on theNetwork Security appliance. ``` hostname (config) # aaa authorization access-groups area yara_rules enable Type 'YES' to confirm enabling access groups that limit access to certain objects like alerts for non-admin users: YES ``` ``` hostname (config) # show aaa authorization access-groups AAA Access-groups enabled for : yara_rules ``` ``` No Access groups configured. ``` :