--- title: "Enabling and disabling auto restart of scans" slug: "enabling-and-disabling-auto-restart-of-scans-1" updated: 2026-09-08T21:44:57Z published: 2026-09-08T21:44:57Z canonical: "docs.trellix.com/enabling-and-disabling-auto-restart-of-scans-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling and disabling auto restart of scans Use the commands in this section to enable or disable automatic resumption of scans in storages that have been remounted. **To enable the automatic scan restart feature:** 1. Enable the CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Enable automatic scan restart: ``` hostname (config) # fmps scan auto-restart ``` 3. Save your changes: ``` hostname (config) # write memory ``` **To disable the automatic scan restart feature:** 1. Enable the CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Disable automatic scan restart: ``` hostname (config) # no fmps scan auto-restart ``` 3. Save your changes: ``` hostname (config) # write memory ``` :