--- title: "Enabling and disabling broker mode" slug: "enabling-and-disabling-broker-mode" updated: 2026-08-24T20:40:19Z published: 2026-08-24T20:40:19Z canonical: "docs.trellix.com/enabling-and-disabling-broker-mode" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling and disabling broker mode You can enable a compute node to function as a broker. You can also remove this functionality from a broker, which restores it as a compute node. **Prerequisites** - Operator or Admin access to the Central Management appliance that manages the cluster. - Submission and cluster interfaces are configured on the node to be enabled as a broker node. ##### Enabling and disabling broker mode using the Web UI Use the **Appliances** > **Nodes** page to enable or disable broker mode. ###### To enable or disable broker mode: 1. Log in to the Central Management Web UI. 2. Select **Appliances** > **Nodes**. 3. To enable broker mode: 1. Click the **Actions** menu, and then select **Enable Broker**. 2. If you are prompted to make this the master configuration and want to do so, select the **Enable Master Config** check box. 3. Click **ENABLE** to confirm your action. 4. To disable broker mode: 1. To disable broker mode, click the **Actions** menu, and then select **Disable Broker**. 2. When prompted, click **DISABLE** to confirm your action. ##### Enabling and disabling broker mode using the CLI Use the commands in this section to enable or disable broker mode. ###### To enable or disable broker mode: 1. Log in to the Central Management CLI. 2. Enable the CLI configuration mode: ``` cm-hostname > enable cm-hostname # configure terminal ``` 3. To enable broker mode: ``` cm-hostname (config) # cmc mvx cluster broker enable ``` 4. To disable broker mode: ``` cm-hostname (config) # no cmc mvx cluster broker enable ``` 5. Verify your changes: ``` cm-hostname (config) # show cmc mvx cluster nodes ``` 6. Save your changes: ``` cm-hostname (config) # write memory ``` ###### Example The following example enables vx-3 to function as a broker node. ``` cm-1 (config) # cmc mvx cluster Cluster-Acme broker vx-1 enable Broker role enabled successfully on vx-1 ```