--- title: "Enabling and disabling IPMI firmware notifications using the CLI" slug: "enabling-and-disabling-ipmi-firmware-notifications-using-the-cli-6" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-09-07T20:58:12Z published: 2026-09-07T20:58:12Z canonical: "docs.trellix.com/enabling-and-disabling-ipmi-firmware-notifications-using-the-cli-6" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling and disabling IPMI firmware notifications using the CLI This procedure describes how to use CLI commands to disable and re-enable notifications about out-of-date IPMI firmware on the Malware Analysis appliance. This notification is enabled by default. **To disable notifications about out-of-date firmware:** 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Disable notifications: ``` hostname (config) # no ipmi firmware update notice enable ``` 3. Save your changes. ``` hostname (config) # write memory ``` **To re-enable notifications about out-of-date firmware:** 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Enable notifications: ``` hostname (config) # ipmi firmware update notice enable ``` 3. Save your changes. ``` hostname (config) # write memory ```