--- title: "Enabling and disabling IPMI firmware notifications using the CLI" slug: "enabling-and-disabling-ipmi-firmware-notifications-using-the-cli" updated: 2026-09-08T22:57:27Z published: 2026-09-08T22:57:27Z canonical: "docs.trellix.com/enabling-and-disabling-ipmi-firmware-notifications-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling and disabling IPMI firmware notifications using the CLI This procedure describes how to use CLI commands to disable and re-enable notifications about out-of-date IPMI firmware on the File Protect appliance. This notification is enabled by default. To disable notifications about out-of-date firmware: 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Disable notifications: ``` hostname (config) # no ipmi firmware update notice enable ``` 3. Save your changes. ``` hostname (config) # write memory ``` To re-enable notifications about out-of-date firmware: 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Enable notifications: ``` hostname (config) # ipmi firmware update notice enable ``` 3. Save your changes. ``` hostname (config) # write memory ``` :