--- title: "Enabling and disabling SmartVision using the Web UI" slug: "enabling-and-disabling-smartvision-using-the-web-ui" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-09-02T17:27:05Z published: 2026-09-02T17:27:05Z canonical: "docs.trellix.com/enabling-and-disabling-smartvision-using-the-web-ui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling and disabling SmartVision using the Web UI Use the Enable SmartVision checkbox to enable or disable SmartVision. ### Prerequisites - Admin access to the SmartVision appliance. - The appliance is a SmartVision Edition appliance or a SmartVision-capable Network Security sensor or integrated appliance. See the following topics: - [Supported appliances](/docs/supported-appliances) - [Requirements](/docs/requirements-5) - [Limitations](/docs/limitations-4) ### Important Before you deploy a SmartVision appliance to a production environment, make sure that the average events per second (EPS) measured on the appliance does not exceed the recommended maximum EPS. See [Checking the average EPS using the CLI](/docs/checking-the-average-eps-using-the-cli). To enable or disable : 1. Log in to the appliance Web UI and select **Settings > SmartVision Configuration**. 2. Click **SmartVision Alerts Configuration**. 3. Select or clear the **Enable** checkbox. :