--- title: "Enabling and disabling Trellix YARA rules using the CLI" slug: "enabling-and-disabling-trellix-yara-rules-using-the-cli-2" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:33Z published: 2026-09-12T20:42:33Z canonical: "docs.trellix.com/enabling-and-disabling-trellix-yara-rules-using-the-cli-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling and disabling Trellix YARA rules using the CLI Use the commands in this procedure to enable or disable Trellix YARA rules on your Network Security appliance. You cannot use the Web UI to configure YARA rules. > [!NOTE] > Note > > You cannot configure YARA rules using the sensor CLI. ### Prerequisites - An established connection between the Network Security appliance and the Internet. - Administrator or Operator access to the Network Security appliance. **To enable or disable Trellix YARA rules:** 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Enable the Trellix YARA rules. - To enable the Trellix YARA rules: ``` hostname (config) # yara policy fe ``` - To disable the Trellix YARA rules: ``` hostname (config) # yara policy disable ``` 3. Verify your configuration. ``` hostname (config) # show static-analysis config ..... Yara Configuration Yara policy                          : fe ..... ``` 4. Save your changes. ``` hostname (config) # write memory Saving configuration file ... Done! ```