--- title: "Enabling asymmetric flow statistics collection using the CLI" slug: "enabling-asymmetric-flow-statistics-collection-using-the-cli" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:26Z published: 2026-09-12T20:42:26Z canonical: "docs.trellix.com/enabling-asymmetric-flow-statistics-collection-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling asymmetric flow statistics collection using the CLI This procedure shows how to use CLI commands to start collecting statistics on asymmetric traffic. > [!WARNING] > Important > > To avoid depleting system resources and degrading appliance performance, enable this feature only while you are collecting and viewing the statistics needed to investigate asymmetric flows in the network. ### Prerequisites - Admin access to the Network Security appliance. **To start collecting statistics on asymmetric traffic:** 1. Log in to the appliance CLI and go to configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Start collecting statistics on asymmetric traffic: ``` hostname (config) # smartvision event-track asym-flow enable ```