--- title: "Enabling automatic license updates" slug: "enabling-automatic-license-updates-1" updated: 2026-08-27T07:55:34Z published: 2026-09-08T22:58:11Z canonical: "docs.trellix.com/enabling-automatic-license-updates-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling automatic license updates This section describes two ways to enable automatic license updates on the File Protect appliance. ### Configuration wizard method The configuration wizard is typically used to initially configure a new system. The wizard steps, which include the following license activation steps, allow a customer to have a functioning system with only minimal configuration. - Enable fenet service. - Enable fenet license update service. - Sync appliance time with fenet. - Update licenses from fenet. For details about the wizard steps, see [Configuration wizard steps](/docs/configuration-wizard-steps-6) . ### CLI method The following topic describes how to use CLI commands to enable and work with the license update feature: - [Enabling automatic license updates using the CLI](/docs/enabling-automatic-license-updates-using-the-cli-4) ### Prerequisites - An established connection between the appliance and the Internet. - Operator or Admin access to enable the license update feature and download and install licenses. - DTI network access to allow the appliance to get updates directly from the DTI network. - (Optional) Admin access to synchronize the system clock with the DTI server clock. :