--- title: "Enabling automatic license updates using the CLI" slug: "enabling-automatic-license-updates-using-the-cli-1" updated: 2026-09-30T16:13:56Z published: 2026-09-30T16:13:56Z canonical: "docs.trellix.com/enabling-automatic-license-updates-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling automatic license updates using the CLI When the license update feature is enabled, license updates are automatic. You can also explicitly update licenses. To verify and enable automatic license updates: 1. Go to CLI configuration mode: ```plaintext hostname > enable hostname # configure terminal ``` 2. Verify the license update feature status: ```plaintext hostname (config) # show fenet license fenet License Update Service Licensing service: Administratively enabled Last time licensing service was contacted: 2014/08/11 10:50:04 Last time licensing service was contacted successfully: 2014/08/11 10:50:04 Last time keys from licensing service were applied: 2014/08/07 17:50:03 ``` 3. If the license update feature service is disabled, enable it: ```plaintext hostname (config) # fenet license update enable ``` 4. Save your changes: ```plaintext hostname (config) # write memory ``` ### Note See [Synchronizing the system clock to DTI server time using the CLI](/network-and-platform/docs/synchronizing-the-system-clock-to-dti-server-time-using-the-cli-1) for an option that prevents potential licensing issues if there is a time gap between the two clocks. To explicitly update licenses: 1. Go to CLI configuration mode: ```plaintext hostname > enable hostname # configure terminal ``` 2. Update licenses: ```plaintext hostname (config) # fenet license update ``` 3. Save your changes: ```plaintext hostname (config) # write memory ``` To disable automatic license updates: 1. Go to CLI configuration mode: ```plaintext hostname > enable hostname # configure terminal ``` 2. Disable the feature: ```plaintext hostname (config) # no fenet license update enable ``` 3. Save your changes: ```plaintext hostname (config) # write memory ``` :