--- title: "Enabling AV-check using the CLI" slug: "enabling-av-check-using-the-cli" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Network Security"] updated: 2026-08-24T20:40:19Z published: 2026-08-24T20:40:19Z canonical: "docs.trellix.com/enabling-av-check-using-the-cli" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling AV-check using the CLI This procedure describes how to use CLI commands to re-enable the AV-check component of static analysis. AV-check is enabled by default. You can disable and re-enable AV-check by using CLI commands only. When AV-check is enabled, no other configuration is required. **Prerequisites** - Operator or Admin access. - Static analysis is enabled on the compute node. Check the "Static Analysis enabled" field in the output of the `show static‑analysis config` command. - (Optional) A TrellixAV_ENGINE_SOPHOS license, which enables AV‑check to automatically block the sites categorized by Trellix as malicious. **To enable the AV-check component of static analysis:** 1. Go to CLI configuration mode. ``` vx-hostname > enable vx-hostname # configure terminal ``` 2. Enable AV-check. ``` vx-hostname (config) # static-analysis av-check enable ``` 3. Verify that AV-check is enabled. ``` vx-hostname (config) # show static-analysis config ``` ``` Static Analysis enabled                : yes  AV-suite enabled                     : yes  AV-suite version                     : 6  SA on AV-suite whitelist enabled     : no AV-check enabled                     : yes  Dropper enabled                      : yes  YARA enabled                         : yes   Embedded object extraction enabled     : no Embedded URL extraction enabled        : yes Max URLs from files to be analyzed     : 5 Static info policy                     : Disable Yara Configuration  Yara policy                          : both  Yara customer match limit            : 5  ........ ``` 4. Save your changes. ``` vx-hostname (config) # write memory ```