--- title: "Enabling detailed inspection mode (CLI)" slug: "enabling-detailed-inspection-mode-cli" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-09-12T20:38:44Z published: 2026-09-12T20:38:44Z canonical: "docs.trellix.com/enabling-detailed-inspection-mode-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling detailed inspection mode (CLI) You can enable the IPS-enabled rules engine to perform detailed packet inspection. The rules engine must run in this mode to protect certain protocol ports from brute-force attacks. The list of protocol ports is dynamic, and FireEye controls the list through periodic updates of IPS security content. IPS detailed packet inspection is useful for inspecting traffic flows to email protocols, detecting reconnaissance activity, and detecting brute-force attacks. ### Note IPS detailed packet inspection may slow IPS processing. ##### Prerequisites - Log in to the IPS appliance as Operator or Admin. ##### Procedure To enable detailed packet inspection for brute-force attacks: 1. Enable the CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Enable detailed packet inspection for brute-force attacks. ``` hostname (config) # ips detail-filter ``` 3. Save your changes. ``` hostname (config) # write memory ``` :