--- title: "Enabling greylists using the CLI" slug: "enabling-greylists-using-the-cli" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:26Z published: 2026-09-12T20:42:26Z canonical: "docs.trellix.com/enabling-greylists-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling greylists using the CLI **To enable greylists:** 1. To enable greylists, use the following command in configuration mode: `hostname (config)# web-analysis greylists enable` > [!NOTE] > Note > > If you skip this requirement, the Web UI Settings tab does not include greylist options. 2. Create a greylist text file that contains the URLs or IP addresses (or subnets), one item per line. The greylist must be hosted on a server and accessible using HTTP, FTP, TFTP, or SCP. See [Example: Greylists](/network-and-platform/docs/example-greylists) . > [!NOTE] > Note > > File names can include the following characters: letters (a-z, A-Z), numbers (0-9), underscores (_), periods (.), plus and minus signs (+, -), single quotes (‘), and left and right parentheses. Any other characters are replaced with the minus (-) sign. For example, if the name of the file you upload is *hello%hello.doc*, then it will be renamed and stored on the appliance as *hello-hello.doc*.