--- title: "Enabling Helix Enterprise mode on on-premises appliances" slug: "enabling-helix-enterprise-mode-on-on-premises-appliances" tags: ["Helix Enterprise", "Integration", "Sec Ops and Analytics"] updated: 2026-09-05T14:08:38Z published: 2026-09-05T14:08:38Z canonical: "docs.trellix.com/enabling-helix-enterprise-mode-on-on-premises-appliances" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling Helix Enterprise mode on on-premises appliances Use the commands in this topic to enable Helix Enterprise on on-premises appliances. To enable Helix Enterprise mode on an on-premises appliance: 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal                   ``` 2. To enable Helix Enterprise mode on an appliance and allow SSO: ``` hostname (config) # helix mode on-premises                   ``` 3. To enable Helix Enterprise mode on an appliance and enforce SSO: ``` hostname (config) # helix mode on-premises with-sso ``` 4. Verify your changes: ``` hostname (config) # show helix                   ``` 5. Save your changes: ``` hostname (config) # write memory                   ``` ### Example The following example shows the current Helix Enterprise status of nx-01 and then enables Helix Enterprise on it. ``` nx-01 (config) # show helix  Helix Configurations:    Enabled                : no    FQDN                   :    Bootstrap Certificate  :     nx-01 (config) # helix mode on-premises nx-01 (config) # show helix  Helix Configurations:     Enabled               : yes     FQDN                  : myhelix.receiver.apps.fireeye.com     Bootstrap Certificate : helix-bootstrap     Single Sign-On        : allowed         Console URL           : https://apps.fireeye.com/helix/id/abcdef123     Alert Sync Enabled    : yes     Alert Sync From       : 0 days old     Alert Sync Max Count  : 10000 ```