--- title: "Enabling HTTP health checks for Network Security monitoring ports on AWS" slug: "enabling-http-health-checks-for-network-security-monitoring-ports-on-aws" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-09-09T22:45:38Z published: 2026-09-09T22:45:38Z canonical: "docs.trellix.com/enabling-http-health-checks-for-network-security-monitoring-ports-on-aws" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling HTTP health checks for Network Security monitoring ports on AWS You can enable an HTTP server running on monitoring ports to respond to HTTP health check heartbeats. The health check functionality can be used to monitor the health of the Network Security instance. To enable HTTP health checks: 1. Log in to the Network Security CLI. 2. Go to CLI configuration mode: `hostname > enable hostname # configure terminal` 3. Enable HTTP health checks: `hostname (config) # policymgr interface <port-pair> health-check http port <port>` where` interface `is the interface pair and` port `is the port number (1–65535) on which the HTTP server is running. 4. Verify your changes: `hostname (config) # show policymgr interfaces` To disable HTTP health checks: 1. Log in to the Network Security CLI. 2. Go to CLI configuration mode: `hostname > enable hostname # configure terminal` 3. Disable HTTP health checks. To disable health checks on all HTTP ports configured on an interface: `hostname (config) # no policymgr interface <port-pair> health-check http` To disable health checks on a specific HTTP port configured on an interface: `hostname (config) # no policymgr interface <port-pair> health-check http port <port>` 4. Verify your changes: `hostname (config) # show policymgr interfaces` ### Examples The following example enables HTTP health checks on interface pair A using port 80. ``` hostname (config) # policymgr interface A health-check http port 80 hostname (config) # show policymgr interfaces Policy enabled: yes Interface A  Active        : yes  op mode       : block (enforcing)  fail-safe     : close  policy        : mixed  tolerance     : 1  Ports         : pether3 pether4  QinQ          : no  QinQ-evt      : 0x88a8  Health Port   : 80 ``` The following example disables HTTP health checks on interface pair A. ``` hostname (config) # no policymgr interface A health-check http hostname (config) # show policymgr interfaces Interface A  ...  Health Port   : ``` :