--- title: "Enabling HTTP proxy settings for automatic failover using the CLI" slug: "enabling-http-proxy-settings-for-automatic-failover-using-the-cli" tags: ["File Protect (FX)", "Product Usage"] updated: 2026-10-01T10:54:55Z published: 2026-10-01T10:54:55Z canonical: "docs.trellix.com/enabling-http-proxy-settings-for-automatic-failover-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling HTTP proxy settings for automatic failover using the CLI You can configure a managed appliance that uses single-port communication to use the Central Management System appliance for DTI services, but to fail over to the HTTP proxy server if the Central Management System appliance becomes unavailable. This is the default behavior when an HTTP proxy server is configured and enabled on the appliance. To enable automatic failover for DTI services: 1. Go to CLI configuration mode: ```plaintext hostname > enable hostname # configure terminal ``` 2. Configure and enable the proxy server as described in [Configuring HTTP proxy server settings using the CLI](/network-and-platform/docs/configuring-http-proxy-server-settings-using-the-cli-3) 3. Verify that the Central Management System appliance controls the active settings for the DTI services, that the HTTP proxy server is enabled, and that HTTP proxy settings are disabled for DTI services: ```plaintext hostname (config) # show fenet dti configuration brief ``` 4. Save your changes: ```plaintext hostname (config) # write memory ``` ### Example The following example configures minimal settings for an HTTP proxy server and then enables it. It then shows that the Central Management System appliance currently controls the active settings for DTI services, that the proxy server is configured and enabled on the appliance, and that proxy settings are currently disabled for DTI services. If the Central Management System appliance becomes unavailable, the values in the` ACTIVE SETTINGS `section change to` DTI`, and the values in the` ACTIVE SETTINGS FOR HTTP PROXY `section change to` yes`. ```plaintext hostname (config) # fenet proxy host 192.168.2.3 hostname (config) # fenet proxy enable hostname (config) # show fenet dti configuration brief DTI CLIENT CONFIGURATIONS:  ACTIVE SETTINGS:    Mode               : online    Download source    : CMS (User8@10.4.5.6 : singleport) - Managed by CMS    Upload destination : CMS (User8@10.4.5.6 : singleport) - Managed by CMS    Mil service        : CMS (User8@10.4.5.6 : singleport) - Managed by CMS    Faude service      : CMS (User8@10.4.5.6 : singleport) - Managed by CMS    ...  ACTIVE SETTINGS FOR HTTP PROXY:    Http proxy         : @192.168.2.3:8080 (User agent:)        Download source    : no (reason: singleport is in use)    Upload destination : no (reason: singleport is in use)    Mil service        : no (reason: singleport is in use)    Faude service      : no (reason: singleport is in use)    ... ``` :