--- title: "Enabling Interface Loopback Using the Web UI" slug: "enabling-interface-loopback-using-the-web-ui" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:40Z published: 2026-09-12T20:42:40Z canonical: "docs.trellix.com/enabling-interface-loopback-using-the-web-ui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling Interface Loopback Using the Web UI Use the **Traffic Loopback** tab in the **Troubleshooting** page to enable the interface loopback configuration. **To enable the interface loopback functionality:** 1. In the Web UI, navigate to **Troubleshooting** > **Traffic Loopback**. 2. In the **Traffic Loopback Configuration** section, set the **Enable Traffic loopback mode** option to On. 3. Select the **Interface Loopback** option. 4. Select the applicable port pairs. 5. Click **Apply**.