--- title: "Enabling malware intrinsic analysis using the CLI" slug: "enabling-malware-intrinsic-analysis-using-the-cli" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Network Security"] updated: 2026-08-24T20:40:26Z published: 2026-08-24T20:40:26Z canonical: "docs.trellix.com/enabling-malware-intrinsic-analysis-using-the-cli" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling malware intrinsic analysis using the CLI This procedure describes how to use CLI commands to re-enable the malware intrinsic analysis component of static analysis. Malware intrinsic analysis is enabled by default. You can disable and re-enable intrinsic analysis by using CLI commands only. When intrinsic analysis is re-enabled, no other configuration is required. **Prerequisites** - Operator or Admin access. - Static analysis is enabled on the Intelligent Virtual Execution - Server appliance. Check the "Static Analysis enabled" field in the output of the `show static‑analysis config` command. - The latest Trellix security content with the new malware samples downloaded and installed on the Network Security sensors that are enrolled with the MVX cluster. Use the `fenet security-content apply-update` command. **To enable the intrinsic analysis component of static analysis:** 1. Go to CLI configuration mode. ``` vx-hostname > enable vx-hostname # configure terminal ``` 2. Enable malware intrinsic analysis. ``` vx-hostname (config) # static-analysis malware-intrinsic-analysis enable ``` 3. Verify that malware intrinsic analysis is enabled. ``` vx-hostname (config) # show static-analysis config  Static Analysis enabled                : yes    AV-suite enabled                     : yes    AV-check enabled                     : yes    Dropper enabled                      : no    YARA enabled                         : yes    Malware Intrinsic Analysis enabled   : yes (DTI)  Embedded object extraction enabled     : no  Static info policy                     : Disable  Yara Configuration    Yara policy                          : both    Yara customer match limit            : 5    Yara customer default weight         : 0  Malware Whitelist Past Hours           : 24  Malware Blacklist Past Hours           : 4  Analysis reset duplicate since         : 2016/07/07 22:46:16  Mobile Threat Prevention               : yes ``` 4. Save your changes. ``` vx-hostname (config) # write memory ```