--- title: "Enabling or disabling a certificate with missing basic constraints using the CLI" slug: "enabling-or-disabling-a-certificate-with-missing-basic-constraints-using-the-cli-1" tags: ["File Protect (FX)", "Malware Analysis (AX)", "IAM", "Email Security - Cloud", "Network Security (NX)", "Email Security — Server", "Central Management System", "Helix Enterprise", "Endpoint Security (HX)", "Product Usage", "Install and Get Started", "Helix", "Intelligent Virtual Execution "] updated: 2026-09-01T19:03:07Z published: 2026-09-01T19:03:07Z canonical: "docs.trellix.com/enabling-or-disabling-a-certificate-with-missing-basic-constraints-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling a certificate with missing basic constraints using the CLI Use the CLI commands in this section to enable or disable the appliance to allow the user to log in to the Web UI even when the basic constraints extension is not included in the X.509 certificate. The basic constraints extension is used to identify that the certificate is issued for a Certificate Authority (CA). By default, the appliance verifies if the basic constraints extension is included in the X.509 certificate, and the login fails if the extension is not found. When the` aaa authentication certificate validation allow-missing-basic-constraints `command is disabled, users cannot log in to the Web UI if the basic constraints extension is not included in the X.509 certificate. To enable the appliance to allow a certificate with a missing basic constraints extension: 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Enable the appliance to allow the user to log in to the Web UI even when the basic constraints extension is not included in the X.509 certificate. ``` hostname (config) # aaa authentication certificate validation allow-missing-basic-constraints ``` 3. Verify the status of the basic constraints extension. ``` hostname (config) # show aaa authentication certificate ``` ``` Certificate based authentication settings: ``` ```  ... ``` ```  OCSP override responder        : no ``` ```  Basic constraints must present : no ``` ```  ... ``` 4. Save your changes. ``` hostname (config) # write memory ``` To prohibit certificates with a missing basic constraints extension: 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Disable the option to allow the user to log in to the Web UI when the basic constraints extension is not included in the X.509 certificate. ``` hostname (config) # no aaa authentication certificate validation allow-missing-basic-constraints ``` 3. Verify the status of the basic constraints extension. ``` hostname (config) # show aaa authentication certificate ``` ``` Certificate based authentication settings: ``` ```  ... ``` ```  OCSP override responder        : no ``` ```  Basic constraints must present : yes ``` ```   ... ``` 4. Save your changes. ``` hostname (config) # write memory ``` :