--- title: "Enabling or disabling a GRE traffic whitelist using the CLI" slug: "enabling-or-disabling-a-gre-traffic-whitelist-using-the-cli" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:40Z published: 2026-09-12T20:42:40Z canonical: "docs.trellix.com/enabling-or-disabling-a-gre-traffic-whitelist-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling a GRE traffic whitelist using the CLI Use the CLI commands in this procedure to enable or disable a GRE traffic whitelist. **To enable a GRE traffic whitelist:** 1. Go to CLI configuration mode. `hostname > enable hostname # configure terminal` 2. Enable the GRE traffic whitelist. `hostname (config) # policymgr whitelist gre enable` 3. Save your changes. `hostname (config) # write memory` 4. Verify the status of a GRE traffic whitelist. `hostname (config) # show policymgr whitelist configGeneric Routing Encapsulation packet whitelist enabled: yes Port Based whitelist enabled: no` **To disable a GRE traffic whitelist:** 1. Go to CLI configuration mode. `hostname > enable hostname # configure terminal` 2. Disable the GRE traffic whitelist. `hostname (config) # no policymgr whitelist gre enable` 3. Save your changes. `hostname (config) # write memory` 4. Verify the status of a GRE traffic whitelist. `hostname (config) # show policymgr whitelist configGeneric Routing Encapsulation packet whitelist enabled: no Port Based whitelist enabled: no`