--- title: "Enabling or disabling advanced URL defense using the CLI" slug: "enabling-or-disabling-advanced-url-defense-using-the-cli-1" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:33Z published: 2026-09-12T20:42:33Z canonical: "docs.trellix.com/enabling-or-disabling-advanced-url-defense-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling advanced URL defense using the CLI Follow these steps to enable or disable the Advanced URL Defense feature using the CLI. > [!WARNING] > Important > > When the Central Management System appliance is used to manage your Network Security appliances, use one of the following configuration commands to enable Advanced URL Defense: > > - `cmc execute appliance <appliance_name> command "analysis url policy adv-url-defense enable"` > - `cmc execute group <group_name> command "analysis url policy adv-url-defense enable"` > > The Central Management System appliance will apply the setting globally to all qualified Network Security appliances that are connected or will be connected to that Central Management System appliance. > [!NOTE] > Note > > In Release 8.0, do not use the `show email-analysis policy` command to verify the status for Advanced URL Defense. **To enable Advanced URL Defense:** 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Enable the settings for Advanced URL Defense. ``` hostname (config) # analysis url policy adv-url-defense enable ``` > [!NOTE] > Note > > In Release 8.0, the `email-analysis policy adv-url-defense enable` command was changed to the `analysis url policy adv-url-defense enable` command. 3. Save your changes. ``` hostname (config) # write memory ``` 4. Verify the status for Advanced URL Defense. ``` hostname (config) # show analysis url-policy . . Advanced URL Defense: yes ``` **To disable Advanced URL Defense:** 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Disable Advanced URL Defense. ``` hostname (config) # no analysis url policy adv-url-defense enable ``` > [!NOTE] > Note > > In Release 8.0, the `no email-analysis policy adv-url-defense enable` command was changed to the `no analysis url policy adv-url-defense enable` command. 3. Save your changes. ``` hostname (config) # write memory ``` 4. Verify the status for Advanced URL Defense. ``` hostname (config) # show analysis url-policy . . Advanced URL Defense: no ```