--- title: "Enabling or disabling appliance health reporting" slug: "enabling-or-disabling-appliance-health-reporting" tags: ["Integration", "Helix", "Sec Ops and Analytics"] updated: 2026-09-02T19:14:07Z published: 2026-09-02T19:14:07Z canonical: "docs.trellix.com/enabling-or-disabling-appliance-health-reporting" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling appliance health reporting Use the commands in this topic to enable an appliance to upload health status reports to Trellix Helix. (This functionality is enabled by default after Trellix Helix mode is enabled on the appliance). The `no` form of this command temporarily disables health status reporting. When the appliance is reloaded, health status reporting is automatically enabled. **To enable health reporting:** 1. Log into the appliance CLI. 2. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal               ``` 3. Enable health reporting: ``` hostname (config) # helix health-stats enable               ``` 4. Verify the change: ``` hostname (config) # show helix health-stats status ``` **To disable health reporting:** 1. Log into the appliance CLI. 2. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal               ``` 3. Disable health reporting: ``` hostname (config) # no helix health-stats enable ``` 4. Verify the change: ``` hostname (config) # show helix health-stats status ``` **Example** The following example enables the ex-05 appliance to upload Trellix Helix health status reports. ``` ex-05 (config) # helix health-stats enable ex-05 (config) # show helix health-stats status Helix health reporting:   Service:     Enabled             : yes       ... ```