--- title: "Enabling or disabling AV-Check" slug: "enabling-or-disabling-av-check-2" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-08-21T18:19:50Z published: 2026-09-12T20:42:46Z canonical: "docs.trellix.com/enabling-or-disabling-av-check-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling AV-Check Use the CLI commands to enable or disable AV-Check, which provides another type of static analysis on the Network Security appliance. AV-Check allows the Network Security appliance to use antivirus tools, such as Sophos and ClamWin, to scan malware samples. After you have configured AV-Check using the CLI, you can view the analysis of the results on the > **Alerts** page in the Web UI. After AV-Check is enabled, no other configuration is required. > [!NOTE] > Note > > You cannot enable AV-Check using the sensor CLI. > > Because the Intelligent Virtual Execution - Server compute node performs static analysis on submitted malware samples, the output fields for each static analysis tool are not displayed for the **show static-analysis config** command on the sensor. ### Prerequisites - Administrator or Operator access to the Network Security appliance - An AV_ENGINE_SOPHOS license