--- title: "Enabling or disabling AV-Suite integration using the CLI" slug: "enabling-or-disabling-av-suite-integration-using-the-cli-1" updated: 2026-09-08T23:22:51Z published: 2026-09-08T23:22:51Z canonical: "docs.trellix.com/enabling-or-disabling-av-suite-integration-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling AV-Suite integration using the CLI Use the CLI commands to enable or disable AV-Suite integration between the appliance and the DTI cloud. ### Note AV-suite version 6 must be configured for AV-Suite to receive suspicious object hashes through the DTI network to determine whether the object hashes have been seen before. You can view the results of this integration only using the Web UI. ### Prerequisites - Administrator or Operator access to the File Protect appliance - An established connection to the Internet - A connection to the DTI Cloud - A FIREEYE_SUPPORT license To enable AV-Suite integration: 1. Enable the CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Enable AV-Suite integration on the appliance. ``` hostname (config) # static-analysis av-suite enable ``` 3. Verify the status of AV-Suite integration. ``` hostname (config) # show static-analysis config  Static Analysis enabled                   : yes    AV-suite enabled                        : yes    AV-suite version                        : 6    SA on AV-suite whitelist enabled        : no    AV-check enabled                        : yes    Dropper enabled                         : yes    YARA enabled                            : yes  ..... ``` To disable AV-Suite integration: 1. Enable the CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Disable AV-Suite integration on the appliance. ``` hostname (config) # no static-analysis av-suite enable ``` 3. Verify the status of AV-Suite integration. ``` hostname (config) # show static-analysis config  Static Analysis enabled                   : yes    AV-suite enabled                        : no    AV-suite version                        : 6    SA on AV-suite whitelist enabled        : no    AV-check enabled                        : yes    Dropper enabled                         : yes    YARA enabled                            : yes  ..... ``` :