--- title: "Enabling or disabling AV-Suite integration using the CLI" slug: "enabling-or-disabling-av-suite-integration-using-the-cli-2" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:40Z published: 2026-09-12T20:42:40Z canonical: "docs.trellix.com/enabling-or-disabling-av-suite-integration-using-the-cli-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling AV-Suite integration using the CLI Use the CLI commands to enable or disable AV-Suite integration between the appliance and the DTI cloud. > [!NOTE] > Note > > AV-suite version 6 must be configured for AV-Suite to receive suspicious object hashes through the DTI network to determine whether the object hashes have been seen before. > > You can view the results of this integration only using the Web UI. > > You cannot enable AV-Suite integration using the sensor CLI. ### Prerequisites - Administrator or Operator access to the Network Security appliance - An established connection to the Internet - A connection to the DTI Cloud - A FIREEYE_SUPPORT license **To enable AV-Suite integration:** 1. Enable the CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Enable AV-Suite integration on the appliance. ``` hostname (config) # static-analysis av-suite enable ``` 3. Verify the status of AV-Suite integration. ``` hostname (config) # show static-analysis config  Static Analysis enabled                   : yes    AV-suite enabled                        : yes    AV-suite version                        : 6    SA on AV-suite whitelist enabled        : no    AV-check enabled                        : yes    Dropper enabled                         : yes    YARA enabled                            : yes  ..... ``` **To disable AV-Suite integration:** 1. Enable the CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Disable AV-Suite integration on the appliance. ``` hostname (config) # no static-analysis av-suite enable ``` 3. Verify the status of AV-Suite integration. ``` hostname (config) # show static-analysis config  Static Analysis enabled                   : yes    AV-suite enabled                        : no    AV-suite version                        : 6    SA on AV-suite whitelist enabled        : no    AV-check enabled                        : yes    Dropper enabled                         : yes    YARA enabled                            : yes  ..... ```