--- title: "Enabling or disabling Central Management System Peer Distributed Correlation using the CLI" slug: "enabling-or-disabling-central-management-system-peer-distributed-correlation-cli-2" updated: 2026-08-25T21:17:48Z published: 2026-08-25T21:17:48Z canonical: "docs.trellix.com/enabling-or-disabling-central-management-system-peer-distributed-correlation-cli-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling Central Management System Peer Distributed Correlation using the CLI Follow these steps to enable or disable the Central Management System Peer Distributed Correlation feature on each Central Management System peer using the CLI. To enable the Central Management System Peer Distributed Correlation feature: 1. Go to CLI configuration mode. ``` CMS1 > enable CMS1 # configure terminal ``` 2. Enable the Central Management System Peer Distributed Correlation feature on a Central Management System peer. ``` CMS1 (config) # cms peer interaction dist-correlation enable ``` 3. Save your changes. ``` CMS1 (config) # write memory ``` 4. Verify the Distributed Correlation status on a CM peer. The following example verifies that Distributed Correlation is enabled on CMS2. ``` CMS1 (config) # show cms peer-service CMS peer-service enabled:          yes ----------------------------------------------------------------------- CMS peer CMS2: Enabled:                     yes Hostname:                    CMS2   Address:                     172.16.216.51   Auth-token checksum:         360a37cc532b9e2e75b674eb3b5fe2e0   Interactions with peer:   Distributed CMS Correlation:   Enabled:                        yes   Status:                         OK          @ 2016/01/27 18:59:38      Dynamic Threat Intelligence (DTI):        Enabled:                        yes        Proxy mode:                     No proxy        Status:                         OK          @ 2016/01/27 18:59:38      Update Peer:         Enabled:                        yes         Status:                         OK          @ 2016/01/27 19:02:23 ----------------------------------------------------------------------- ``` To disable the Central Management System Peer Distributed Correlation feature: 1. Go to CLI configuration mode. ``` CMS1 > enable CMS1 # configure terminal ``` 2. Disable the CM Peer Distributed Correlation feature on a CM peer. ``` CMS1 (config) # no cms peer interaction dist-correlation enable ``` 3. Verify the Distributed Correlation status on a CM peer. The following example verifies that Distributed Correlation is disabled on CMS2. ``` CMS1 (config) # show cms peer-service CMS peer-service enabled:          yes ----------------------------------------------------------------------- CMS peer CMS2:  Enabled:                     yes  Hostname:                    CMS2   Address:                     172.16.216.51   Auth-token checksum:         360a37cc532b9e2e75b674eb3b5fe2e0   Interactions with peer:      Distributed CMS Correlation:         Enabled:                        no         Status:                         UNKNOWN     @ N/A      Dynamic Threat Intelligence (DTI):         Enabled:                        yes         Proxy mode:                     No proxy         Status:                         OK          @ 2016/01/27 18:59:38      Update Peer:         Enabled:                        yes         Status:                         OK        @ 2016/01/27 19:02:23 ----------------------------------------------------------------------- ``` :