--- title: "Enabling or disabling Central Management System Peer Signature Sharing using the CLI" slug: "enabling-or-disabling-central-management-system-peer-signature-sharing-cli" updated: 2026-08-25T21:18:18Z published: 2026-08-25T21:18:18Z canonical: "docs.trellix.com/enabling-or-disabling-central-management-system-peer-signature-sharing-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling Central Management System Peer Signature Sharing using the CLI Follow these steps to enable or disable DTI interaction between Central Management System peers for Central Management System Peer Signature Sharing using the CLI. To enable Central Management System Peer Signature Sharing: 1. Go to CLI configuration mode. ``` CMS1 > enable CMS1 # configure terminal ``` 2. Generate a key file to enable DTI interaction between CM peers to share locally generated signatures with remote CM peers. ``` CMS1 (config) # cms peer interaction dti enable ``` 3. Save your changes. ``` CMS1 (config) # write memory ``` 4. Verify the DTI interaction status with a Central Management System peer for Central Management System Peer Signature Sharing. The following example verifies that DTI interaction with CMS2 is enabled for Central Management System Peer Signature Sharing. ``` CMS1 (config) # show cms peer-service CMS peer-service enabled:          yes ----------------------------------------------------------------------- CMS peer CMS2:   Enabled:                     yes  Hostname:                    CMS2   Address:                     172.16.216.51   Auth-token checksum:         360a37cc532b9e2e75b674eb3b5fe2e0   Interactions with peer:      Distributed CMS Correlation:         Enabled:                        yes          Status:                         OK          @ 2016/01/27 19:07:26      Dynamic Threat Intelligence (DTI):         Enabled:                        yes         Proxy mode:                     No proxy         Status:                         OK          @ 2016/01/27 19:07:26      Update Peer:         Enabled:                        yes         Status:                         OK          @ 2016/01/27 19:07:26 ----------------------------------------------------------------------- ``` To disable DTI interaction with a Central Management System peer for Central Management System peer signature sharing: 1. Go to CLI configuration mode. ``` CMS1 > enable CMS1 # configure terminal ``` 2. Disable DTI interaction with a CM peer for CM Peer Signature Sharing. ``` CMS1 (config) # no cms peer interaction dti enable ``` 3. Save your changes. ``` CMS1 (config) # write memory ``` 4. Verify the DTI interaction status with a CM peer for CM Peer Signature Sharing. The following example verifies that DTI interaction with CMS2 is disabled for CM Peer Signature Sharing. ``` CMS1 (config) # show cms peer-service CMS peer-service enabled:          yes ----------------------------------------------------------------------- CMS peer CMS2:   Enabled:                     yes   Hostname:                    CMS2   Address:                     172.16.216.51   Auth-token checksum:         360a37cc532b9e2e75b674eb3b5fe2e0   Interactions with peer:      Distributed CMS Correlation:         Enabled:                        yes         Status:                         OK          @ 2016/01/27 19:07:26      Dynamic Threat Intelligence (DTI):         Enabled:                        no         Proxy mode:                     No proxy         Status:                         UNKNOWN     @ N/A      Update Peer:         Enabled:                        yes         Status:                         OK          @ 2016/01/27 19:07:26 ----------------------------------------------------------------------- ``` :