--- title: "Enabling or disabling custom YARA rules using the CLI" slug: "enabling-or-disabling-custom-yara-rules-using-the-cli-2" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:33Z published: 2026-09-12T20:42:33Z canonical: "docs.trellix.com/enabling-or-disabling-custom-yara-rules-using-the-cli-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling custom YARA rules using the CLI Use the commands in this procedure to enable or disable custom YARA rules on your Network Security appliance. You cannot use the Web UI to configure YARA rules. > [!NOTE] > Note > > You cannot configure YARA rules using the sensor CLI. ### Prerequisites - An established connection between the Network Security appliance and the Internet. - Administrator or Operator access to the Network Security appliance. **To enable custom YARA rules:** 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Enable the custom YARA rules. ``` hostname (config) # yara policy cust ``` 3. Verify your configuration. ``` hostname (config) # show static-analysis config ..... Yara Configuration Yara policy                             : cust ..... ``` 4. Save your changes. ``` hostname (config) # write memory ``` **To disable custom YARA rules:** 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Disable the custom YARA rules. ``` hostname (config) # yara policy disable ``` 3. Verify your configuration. ``` hostname (config) # show static-analysis config ..... Yara Configuration  Yara policy                             : disable ``` 4. Save your changes. ``` hostname (config) # write memory ```